Department:  Faculty of Agricultural Engineering & Technology, Department of Fibre Technology

Position:  Lecturer

HEC Approved Supervisor:  NO

Research Intersts:  Department of Fibre and Textile Technology is the sole depart all over the country and offering Master level degree program in textile fibre sciences, which covers the entire textile sector in particularly in spinning, weaving, knitting, dyeing and applications of advanced techniques on synthetic fibre technology. My current area of interests are focused on applications of modern techniques applied on Natural as well as Synthetic Fibres and their end products.

Publications:  

1. Tusief, M. Q. , M. H. Malik, M. Mohsin, H. N. Asghar, M. Iqbal, and N. Mahmood, 2020, Eco-friendly degradation of reactive blue dye enriched textile water by floating treatment wetlands (FTWs) system applying the strategy of plant-bacteria partnership (Part B), Pakistan Journal of Scientific and Industrial Research. Series A. Physical Sciences, 63A, 40-47
2. Tusief, M. Q. , N. Mahmood, N. Amin, and A. Saeed, 2019, Investigating the abrasion resistance and pilling properties of knitted fabrics: effect of yarn type and machine gauge, Pakistan Journal of Scientific and Industrial Research. Series A. Physical Sciences, 62A, 52-56
3. Tusief, M. Q. , M. H. Malik, H. N. Asghar, M. Mohsin, and N. Mahmood, 2019, Bioremediation of textile wastewater through floating treatment wetland system, International Journal of Agriculture and Biology, 22, 821-826
4. Tusief, M. Q. , M. H. Malik, M. Mohsin, H. N. Asghar, M. Iqbal, and N. Mahmood, 2019, Development of floating treatment wetlands with plant-bacteria partnership to clean textile bleaching effluent, Industria Textila, 70, 502-511
5. Tusief, M. , N. Mahmood, N. Amin, and A. Saeed, 2017, Qualitative analysis of Siro-spun and Two fold yarns tensile properties under the influence of twist factor, Pakistan Journal of Scientific and Industrial Research. Series A. Physical Sciences, 60, 29-33
6. Tusief, M. Q. , N. Amin, N. Mahmood, M. B. Ramzan, and H. R. Saleem, 2017, The Role of Yarn Counts and Polyester/Cotton Blends in Comfort of Knitted Fabric, Pakistan Journal of Scientific and Industrial Research. Series A. Physical Sciences, 60, 162-168
7. Tusief, M. , N. Amin, N. Mahmood, I. Ahmad, and M. Abbas, 2015, Antimicrobial Studies of Knitted Fabrics from Bamboo, Soybean and Flax Fibers at Various Blends, Journal of Textile Science & Engineering, 5, 1-4
8. Tusief, M. , N. Mahmood, N. Amin, and M. Siddique, 2014, Impact of Various Wrinkle Free Finishes on Wrinkle Recovery Property of Cotton Fabric under Different Variables, Journal of Textile Science & Engineering, 4, 1-5
9. Tusief, M. , N. Mahmood, and W. Iqbal, 2014, Tensile Properties of Cotton Yarn as Affected by Yarn Singeing Machine Variables, Pakistan Journal of Scientific and Industrial Research. Series A. Physical Sciences, 57, 172-175
10. Mahmood, N., M.Q. Tusief, G. Murtaza, R. Kanwar and M.A. Khan, 2013, Comparative study of D-slot and straight slot in compact spinning system under mechanical variables, Pak. J. Sci. Ind. Res, 56, 47-53
11. Tusief, M.Q., N. Mahmood, N. Amin and M. Saleem, 2013, Fabric tensile strength as affected by different anti-pilling agentsat various concentrations and pH levels, J. Chem. Soc. Pak., 35, 238-242
12. Tusief. M. Q, Mahmood. N and A. H. Anjum., 2012, The tensile properties of P/C blended yarn as affected by different process variables of Murata Vortex Spinning system., Pakistan Journal of Scientific and Industrial Research. Series A. Physical Sciences, 55, 149-154
13. Mahmood. N, Tusief. M. Q, Iqbal. Danish, Khan. M. A and W. Ishaque,, 2012, Effect of different locations, varieties and micronaire values upon the non-cellulosic and metal contents of cotton., J. Chem. Soc. Pak.,, 34, 16-21
14. Tusief. M. Q, Mahmood. N and M. Saleem, , 2012, Effect of different anti pilling agents to reduce pilling on Polyester/Cotton fabric., Journal of Chemical Society of Pakistan, 34, 53-57
15. Waraich. E.J, Ahmad. R, Hur. R. G. M, Ehsanullah, Ahmad. A & N. Mahmood, , 2012, Response of foliar application of KNO3 on yield, yield components and lint quality of cotton(Gossypium hirsutum L)., African. J. Agri. Res., 6(24), 5457-5463
16. Mahmood, N. M. .Qamar Tausief and Mahmood Azeem, 2010, Impact of Egyptian and CIS long staple cotton varities on Yarn Tensile properties at Ring and Compact Spinning System, Pak. J. Sci. Ind. Res., 53, 158-163
17. Tusief. M. Q., N. Mahmood, M. Arshad and M. Azeem. , 2010, Physico-chemical study of Egyptian and common wealth of Independent states(CIS) long staple cotton and spinning potential evaluation at Ring and compact spinning systems under some Mechanical variable, Pakistan Journal of Sciences , 62, 258-265
18. Mahmood, N. N.A. Jamil ,M. Arshad,M.Q. Tusief and M. Iftikhar, 2009, Interaction study of polyester and Multi bleached cotton Blends for the Tensile Properties of Rotor Spun Melange Yarn, Pak. J. Agri. Sci., 46, 45-50
19. Mahmood, N , M.Arshad, M.Iftikhar and Tahir Mahmood, 2009, Technological study of Ring and compact spinning systems for the manufacturing of slub fancy yarn under multiple slub variations and its effect on woven fabrics, Pak. J. Agric. Sci. , 46, 124-129
20. Mahmood, N. N.A. Jamil ,R.Iqbal and R.M Ahmad, 2008, Enhancing the Single Knitted Fabric Quality by preventing the barre caused by yarn parameters, Pak. J. Agric. Sci., 44, 689-694
21. Jamil,N.A, N. Mahmood and M. Imran, 2007, Comparative study of Crosrol card Mk5D and Mk6 for ultimate effect on yarn quality, Pak. J. Agri. Sci., 44, 168-170
22. Mahmood, N. N.A. Jamil and Sh.Shoaib Ahmed, 2006, Technological Study of Auto-Leveler at Draw Frame on Cotton Yarn Quality, J. Appl. Sci., 6, 287-291
23. Mahmood, N. N.A. Jamil and A. Usman, 2006, Effect of roving tension controller system using different variables and their effect on yarn quality, Pak. Tex. Journal, 55, 54-57
24. Mahmood, N. N.A. Jamil, and M.J. Afzal, 2006, Comparative study of latest open end machine for different rotor speed, opening roller speed & yarn count, Pak. Text. Journal, 55, 50-53
25. Mahmood, N .N.A.Jamil, and I. Bashir, 2006, Technological studies on Modified 21-C and conventional Auto cone & with some mechanical variables, Pak. Text. Journal, 55, 52-54
26. Mahmood, N. , M. Iftikhar, and M. Nasir, 2005, Effect of AFIS Settings on Simplex Machine Gauges and their ultimate effect on P/C Yarn, The Indus Cottons, 2, 102-107
27. Mahmood, N. , N. Jamil, and M. Ashraf, 2005, Influence of some Mechanical Variables on Cotton Yarn count, lea strength and count lea strength product at Ring Frame, The Indus Cotton, 2, 208-215
28. Mahmood, N. , N. Jamil, and K. Ali, 2005, Comparative Study of Murata 7-II and Schlafhorst-338 winding machines with some mechanical Variables, Pakistan Textile Journal, 8, 59-62
29. Mahmood, N. , N. Jamil, M. Saeed, and M. Iftikhar, 2004, Comparative Study of Compact Verses Convential Spinning in Respect Cotton Yarn Uniformity, The Indus Cottons, 2, 44-49
30. Mahmood, N. , N. Jamil, M. Iftikhar, and M. Nasir, 2004, Technological studies of Simplex machine gauges by AFIS setting , Pak.Tex.J., 53(12), 28-30
31. Mahmood, N. , N. Jamil, M. Iftikhar, and M. Irshad, 2004, Effect of air guide element, twist multiplier and top roll pressure on the quality of Compact yarn, Pak.Tex.J., 53(08), 30-34
32. Mahmood, N. , N. Jamil, A. Haq, and M. Javed, 2004, Effect of some mechanical variables in condensed spinning of cotton yarn, Pak.Tex.J., 53(05), 32-34
33. Mahmood, N. , N. Jamil, M. Iftikhar, and M. Saleem, 2004, Comparative Study of Compact versus Ring spinning for neps in cotton yarn , Int .J Agric&Bio, 6 (1), 153-155
34. Jamil, N. , N. Mahmood, M. Iftikhar, and M. Saleem, 2003, Comparative Study on Ring versus Compact spinning with some mechanical variables, Pak.Tex.J., 52(11), 33-37
35. Mahmood, N. , N. Jamil, M. Nawaz, and M. Saeed, 2003, Technological studies on Compact (K-44) versus Ring (G-33) Spinning with reference to yarn Hairiness, Pak.Tex.J., 52(07), 53-56
36. Mahmood, N. , N. Jamil, M. Nadeem, and M. Saeed, 2003, Effect of multiple Variables on the spinability of cotton covered nylon filament core yarn, Pak.Tex.J., 52(02), 30-34
37. Mahmood, N. , N. Jamil, M. Iftikhar, and R. Akram, 2002, Comparative Study on Tensile Properties of Imported and Pakistani cotton yarn, Pakistan Journal of Applied Science, 2(10), 945-947
38. Mahmood, N. , S. Nawaz, and B. Anwar, 2002, Chemical Analysis of Naturally coloured cottons grown in Pakistan, Pakistan Textile Journal, 51(8), 40-42
39. Mahmood, N. , and N. Jamil, 2002, Effect of Some Variables on polyester filament textured yarn, Pak.Tex.J., 51(7), 40-42
40. Mahmood, N. , N. Jamil, M. Iftikhar, and M. Rasheed, 2002, Comparative study of imported and Pakistani cottons., Pak.Tex.J., 51(6), 46-50
41. Nawaz, S. , N. Mahmood, and M. Akhtar, 2002, Influence of machine settings on count of single jersey knitted fabric, Pak.Tex.J., 51(01), 45-48
42. Mahmood, N. , and z. maqsood, 2002, Control of lap and Card sliver evenness and card web neps with mechanical variables at Scutcher, Pak.J.Ari.Sci., 39(01), 66-68
43. Mahmood, N. , S. Nawaz, and B. Anwar, 2001, Physical characteristics of “Naturally colored” cottons grown in Pakistan, Pak.Tex.J., 50(08), 42-45
44. Nawaz, S. , N. Mahmood, and Z. Maqsood, 2001, Effect of scutcher settings upon cotton fiber characteristics, Pak.Tex.J., 50(05), 33-36
45. Jamil, N. , N. Mahmood, and M. Akhtar, 2001, Effect of mechanical variables upon acrylic/cotton blend yarn, Pak.Tex.J., 50(01), 37-40
46. Nawaz, S. , N. Mahmood, and M. Akhtar, 2000, Knitting Machine setting and their effect on shrinkage of fabric, Pak.Tex.J., 49(11), 29-31
47. Mahmood, N. , and N. Jamil, 2000, Effect of card settings on Neps of cotton yarn, Pakistan journal of Sciences, 52(3-4), 48-51
48. Shad, S. , N. Mahmood, and S. Siddiqui, 2000, Spectrophometric studies on dyeing of viscose Rayon Fabric, Pak.Tex.J., 49(08), 45-50
49. Nawaz, S. , and N. Mahmood, 2000, Effect of multiple machine brands upon the spirality single Jersey knits, Pak.Tex.J., 49(05), 40-42
50. Mahmood, N. , N. Jamil, and M. Akhtar, 1999, Bahviour of card waste in open end spinning, Pak.Tex.J., 48, 40-43
51. Mahmood, N. , N. Jamil, and M. Azhar, 1999, Influence of Card setting on Yarn Quality, Pak.Tex.J., 48, 45-47
52. Mahmood, N. , and N. Jamil, 1999, . Effect of Hairiness on cotton Yarn quality , Pak.Tex.J., 48(04), 46-47
53. Jamil, N. , and N. Mahmood, 1999, Influence of noils upon cotton yarn quality, Pak.J.Ari.Sci., 36(1-2), 67-69
54. Jamil, N. , N. Mahmood, and M. Shakoor, 1998, Technological studies on simplex with different settings, Pak.Tex.J., 47(12), 35-38
55. Mahmood, N. , and N. Jamil, 1998, Effect of Noils upon cotton yarn strength, Pak.Tex.J., 47(12), 40-42
56. Jamil, N. , N. Mahmood, and S. Ahmad, 1998, Effect of Card fly addition on yarn quality in Open end spinning , Pak.Tex.J., 47(4), 28-30
57. Jamil, N. , N. Mahmood, I. Ahmad, and H. Mahmood, 1998, A physical characteristics and spinning performance Comparison of cotton Varieties Niab-Karishma, Niab-78and MNH-93., Pak.Tex.J., 47(3), 35-38
58. Jamil, N. , and N. Mahmood, 1997, Effect of Break Drafts and Rubber cots Hardness at Ring Frame upon Tensile parameters of cotton yarn, Pak.Tex.J., 46(02), 30-32

Regular

+92-419201267,92-41-9200161-70, Ext3012

+92-419201267

+92-333-5278809

nasirmahmood23uaf@yahoo.com,